Practical HMI Fresnels with integrated electronic ballast.
Extremely easy to use.
The Daylight 400 are newly conceived HMI Fresnels equipped with a discharge lamp (Osram HMI) and a built-in power supply. The main features of these models are the ease of use, the integrated power supply in the Fresnel body, the high chromatic rendering index (typical of HMI discharge lamps) and the low heat emission.
Lamp: 70 W Osram HMI
Fresnel lens: 120 mm
Colour temperature: 5600 K or 3200 K
Light output: equivalent to approximately 400 W tungsten
Weight: 2.5 kg (5.5 lb)
Angle of the beam: 15° to 55°
Dimensions: 190 x 160 x 180 mm (7.5 x 6 x 7 in)
Mains operation: 220 V — 240 V
Frequency: 50 Hz — 60 Hz
Consumption: 70 W
Barndoors: 4 rotating included
Flicker Free Technology
The Daylight 400 is sold with barndoors included in the box. The filters and the coloured gels can be fixed on the practical inserts on the barndoors of the HMI Fresnels of the Daylight range. Using the mechanism for the spot or diffused light (found in all Lupo HMI Fresnels) together with the barndoors, it is possible to modify light to obtain images that are stunning and with a cinematic look.
compact, easy to handle and robust.
Body in fibre reinforced technopolymer.
The carbon fibre reinforced technopolymer shell guarantees high resistance to any type of use whilst allowing the entire equipment to be carried in a practical and handy way. With the Daylight 400’s ease of use you will not have any limitations.
Photo by Giorgio Cravero
Concentrated or diffused beam mechanism.
All Lupo Fresnel models, including those in the HMI Daylight range, have a mechanism to change the beam’s width (concentrated or diffused). With the Daylight 400 you will have a practical and economical HMI Fresnel, perfect for all your photo shoots or video shootings. The Daylight 400 is equipped with an Osram HMI lamp with high colour rendering index, lasting about 10,000 hours. The 120 mm Fresnel lens is made of high quality borosilicate glass.
Photo by Giorgio Cravero
Photo by Damien Lovegrove
Daylight Lupo range.
Sunlight at hand.
If you need to shoot in the studio (fashion, still life, boudoir, portrait) and do not have natural sunlight available, you can be sure that with the HMI Daylight Lupo range models you will get equally excellent and impactful results. The Osram lamps used for the Daylight Lupo models offer fantastic colour performances and allow you to produce high quality professional jobs.
for every need.
All Lupo products are compatible with a wide range of accessories. Available for the HMI models of the Daylight Lupo range are: softboxes, grids, clamps, tripods and carrying cases. By clicking on the link below you can see the full range of accessories for Daylight 400.
Find out all accessories